- 7-inch TFT display for monitoring cardiac activity, patient vital signs and defibrillation process;
- Voice and visual prompts in AED mode;
- Intelligent system for analyzing the ECG curve with the definition of arrhythmias;
- Ability to register 12 ECG leads, SpO2, non-invasive blood pressure, pulse, capnography;
- Built-in thermal printer;
- Work in automatic and manual mode;
- Use of reusable universal (adult/pediatric) electrodes;
- Possibility of using disposable electrodes;
- Possibility of transcutaneous pacing.
Defibrillator-monitor LIFEGAIN CU-HD1, equipment:
- Warranty card - 1 pc.
- A copy of the registration certificate of the Ministry of Health of Ukraine - 1 pc.
- A copy of the Certificate of Conformity UKRSEPRO - 1 pc.
- Defibrillator - 1 pc.
- Multifunctional reusable electrodes - 1 set.
- Internal rechargeable battery - 1 pc.
- Power supply - 1 pc.
- 3-channel ECG cable;
- Gel - 1 tube.
Optional:
- Bag for transportation;
- SD card;
- 5th or 10 channel ECG cable;
- 12-channel ECG module;
- capnography module;
- transcutaneous defibrillation module;
- SpO2 module;
- non-invasive blood pressure module;
- network adapter for the car;
- software;
- internal electrodes;
- disposable electrodes;
- adapter for disposable electrodes;
Specifications for the LIFEGAIN CU-HD1 Defibrillator Monitor:
Operating modes:
AED: for automatic resuscitation with voice and visual prompts for patients with sudden cardiac arrest, fatal cardiac arrhythmia (ventricular tachycardia and fibrillation).
Manual mode: asynchronous defibrillation and synchronous cardioversion
Transcutaneous stimulation: fixed and adjustable mode
Display:
TFT color LCD 15.2 x 9.1 cm, resolution 800 x 480
Defibrillation:
Waveform - bi-phase fixed and adjustable (patented E-CUBE technology);
Power:
Manual: 1-10J, 15J, 20J, 30J, 50J, 70J, 100J, 120J, 150J, 170J, 200J
AED: 200 J
Used electrodes: multifunctional (pediatric, adult) reusable, disposable electrodes, internal electrodes.
Resistance: 25 - 175 Ohm
AED mode protocol: AAMI DF-80
Synchronization with ECG: start of defibrillation within 60 ms of QRS peak
Charging time up to 200 J: from the network - 6 seconds, from the battery - 7 seconds.
ECG module:
Registered ECG leads:
- when using a 3-channel cable: I, II, III
- when using a 5-channel cable: I, II, III, aVR, aVL, aVF or V
- when using a 10-channel cable: I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6
Displays on displays: 12 assignments.
Pulse range: 30 - 300 bpm with an accuracy of +/- 3 bpm.
Alarms: Heart rate, asystole, ventricular fibrillation, ventricular tachycardia, poor lead contact.
SpO2 module (option):
Saturation range: 70 - 100% with an accuracy of +/- 3 units;
Pulse range: 20 - 250 bpm with an accuracy of +/- 3 bpm.
Perfusion: 0.2%
Alarms: less than minimum, more than minimum (user-programmable)
Non-invasive pacing module:
Waveform - biphasic
Modes: fixed and custom
Amplitude 0 - 200 mA
Width: 20ms
Non-invasive blood pressure module:
Modes: neonatological, pediatric, adult
Method: oscillometric
Control: automatic, manual
Auto intervals: 1, 3, 5, 10, 15, 30, 60, 120 min
Display: systolic, diastolic and mean
Measuring range: 40 - 260 mmHg
Electrical parameters:
Battery: rechargeable 14.8 V, 3.1 Ah, LI-POLYMER type
Mains adapter: DC 18 V, 6 A
Car adapter: DC 12V.
Built-in printer:
Displays the current values on the tape and from the ECG archive, charges, discharges, alarms.
Paper - thermal tape 50 x 40 mm
Storage and transmission of information:
Media: SD card
Recording: voice, ECG, events
Data transfer: USB, IR port
Self test modes:
- nutrition
- readiness for work
- manual test
- periodic system test
Size, weight: 318 x 208 x 355 mm, 5 kg.