Operating table with mechanical lifting TM Omega, production of TOV "Omega Invest Group" (Ukraine).
Designed for placing and fixing a patient on it in a position that creates the most convenient access to various parts of the body and organs during surgical and gynecological operations or examinations.
The table is equipped with mechanisms that allow mutually moving parts and fixing them in the required position. The design of the table allows you to tilt the entire panel, both to the head and foot sides, as well as to the sides or change the relative position of individual sections of the panel.
Structurally, the table consists of a central panel mounted on a cast iron frame, a folding backrest, a folding wing, table lifting and lowering units, table transverse and longitudinal tilt units, as well as removable fittings (headrest, curtain frame, leg holders, side holders, shoulder holders with terminals).
Changing the length of the table according to the growth of the patient is carried out by extending the foot panel with a fixed handle. The massive base is attached to the floor of the operating room and ensures the stability of the table in various inclined positions of the panel. The table panel can rotate around the base by 360º around the vertical axis with fixation in any position.
The table is equipped with a removable headrest, which is able to move along the guide rod with screw fixation in the required position. Special tires run along the side surfaces of the table panel, along which the shoulder holders, side holders and the curtain frame are moved, setting them in the required position.
When using the table as a gynecological chair, the foot panel is lowered or removed, the middle panel of the table is tilted to the head side, and the folding back of the table is fixed in the required position, and the leg holders are set at the required height, pulling them out of the bushings, and fixing them with screws.
Specifications:
- Overall dimensions of the table (length x width), mm 1700 x 500
- Height (min x max), mm 800 x 1000
- Leg section angle 90º
- Rotation of the table around its axis 360º
- Table panel slopes:
- head side 45º
- foot 45º
- to the sides 45º
