Working field lamp (shadowless) SRP 18-2
They have the conclusion of the state sanitary and epidemiological expertise No. 05.03.02-07/1225 dated 15.01.2010.
Shadowless lamps SRP 18-2 are designed for local illumination of the workplace of a dentist. The emission spectrum of the lamps is close to the sun, which makes it possible to produce high-quality restorations of crowns and the manufacture of dentures.
SRP 18-2 fixtures can be used for jewelry work, as well as wherever there are increased requirements for high levels of illumination on the work surface.
Working field luminaires of the SRP series are produced with new generation fluorescent lamps, in which the luminous flux is almost constant throughout the entire service life. Above the lamps are reflectors made of pure anodized aluminum with a mirror surface, which makes it possible to use light energy without any loss. The high-frequency device does not create a stroboscopic effect, provides an even glow, increases the life of the lamps and saves energy.
Between the lamps and the light-scattering grille there is a special filter with an optical transparency of 94%, which does not allow infrared and ultraviolet radiation into the working area, protects the lamp from dust pollution. In practice, the dentist gets two advantages: firstly, the light does not heat the illuminated surfaces, the patient's face and the back of the doctor's head; secondly, light-curing restorative materials do not polymerize, and the color rendering is adequate to natural daylight. The light-diffusing grating provides uniform illumination of the working field with a shadow-free effect. Thanks to the grille, the light does not shine into the eyes of dental assistants who are nearby during work.
Dental lamps are installed above the table using a cantilever structure or suspension, at a height of 80-100 cm. They are attached to the ceiling with cables or special chains. At the request of the client, the lamps can be equipped with a console for fastening to the dental technician's desktop, as well as with a remote control (RC), which allows the use of separate switching on of the lamps.
| Indicators | SRP 18-2 |
| Mains voltage, V | 220 |
| Power supply frequency, Hz | 50 |
| Power consumption, W | 36 |
| Electrical safety class according to GOST 12.2.025-76 | 01 N |
| Degree of protection against external influences GOST 14254-80 | IP20 |
| Light source - fluorescent lamp, Philips | TLD 18W/950 |
| Number of lamps, pcs. | 2 |
| Illumination of the working field, lux | 900 |
| Overall dimensions, mm | 645x335x75 |
| Weight, no more than, kg | 3.5 |
| Console height, m | 0.8-1.0 |
| Suspension chain length, m | 1 |
