Neonatal attachment for phototherapy and heating
resuscitation visits and renewal of the life functions of problem children in the canopy booths of child likuvalny installations
with the contributions of neonatology.
The frame for the block of the upper support is made from aluminum profiles covered with polymer-powder sawing on the yak
fixed U-shaped tubular structure made of chrome-plated railing for fixing curtains. Two ceramic infrared
viprominyuvacha zdіysnyuyut rіvnomіrny rozpodіl promenistnoy heat on the surface of the bed. The upper block is firmly fixed
on the 80 cm window there are some phototherapy lamps, light-emitting diode lighting with light and sound emergency signaling.
The lower pіdіgіv is folded out of a ceramic vippromіnjuvacha and 4 fans, yakі zaspepechauyut іvnomіrniy potіk heated
repeat (thermal curtain) and trim the temperature of the gel mattress. Helium mattress made from non-toxic materials,
vikoristovuєtsya with the method of prevention of decubitus ulcers and saves its elastic-mechanical power for a long time.
The high level of thermal conductivity allows you to increase the constant heat balance between the temperature of the body of the child and the temperature of the mattress.
The block of the lower pіdіgrivu may have three sliding boards for full access to the new people. At the apical parts, open for dichal contours
and cables for carrying out resuscitation methods. The lower block also includes roses for completing with an x-ray cassette.
On the stand panel, there is a short instruction for control and a microprocessor control unit, which includes:
- timer-Apgar with an acoustic signal (sound advance at 1,3,5,7,10 and 20 strands. At 1,5, 10 visual advance (light indication)
- control of the upper piping (auto-servo control and manual modes)
- management of the lower subdistrict
- phototherapy
Under the control unit there is a socket for connecting a digital temperature sensor of the body temperature of the newly born Dallas company
(two are included in the kit: one is in-flight, the other is spare).
The sensor measures the temperature of the body and does not change due to temperature instability (sensor bias)
the system responds by giving a warning signal.
Under the bed of the complex there are two hanging boxes for stained glass materials.
A complex of equipment with a battery, for a long time, for a long time, there is an emergency operation of the sound indication system for temperature control.
Parallel to the station, two pipes for fixing the overhead installation (CPAP, syringe pumps, vitratomirs from volozhuvachs, etc.) are installed.
We can complete the neonatal complex and our veterinary care with gas supply systems for the life of the baby and veterinary
company Medicop (Slovenia): vitratomyroms with sour-chewing masks, sour masks.
Technical characteristics:
| Measure voltage, V | 220±10% |
| Mere frequency, Hz | 50 |
| Reduced tension*, no more, W | 1500 |
| Electrical safety class DSTU EN 60601-1 | I BF |
| Exit to work mode, no more, min. | thirty |
| Illumination of the black light on the stand 400 mm, not less, Lux | 1500 |
| Black light in the range, nm | 400-500 |
| V_dstan v_d surfacing bed to | dzherela obіgrivu, mm | 800±5 |
| Temperature control range in automatic mode ** | 30-39 ºС, with croc 0.1 ºС |
| Dimensions, not more, mm | 700*1000*1980 |
| Weight, no more, kg | 65 |
| Note | With the inclusion of phototherapy, the total tension is not more than 1700 W Variation at the set temperature is not more than ±0.5 ºС |
