Disposer (destructor) of medical needles UMG-01
is intended for the destruction of injection medical needles in procedural, dental, physiotherapy rooms, feldsher and outpatient stations, and other medical rooms.
The principle of operation of the utilizer is based on the use of the effect of an electric arc. A low-voltage, safe voltage is applied to the electrodes, upon contact with the injection needle inserted into the receiving hole of the device, a short circuit occurs, which causes instant burning of the needle. The melt in the form of granules is poured into the accumulator of combustion residues, fixed at the base of the utilizer.
Among the existing analogues, the destructor manufactured by Viola Medtekhnika is qualitatively distinguished by its practicality and
durability.
Durability is achieved through the use of high-quality electrodes (plates) of the main assembly.
In the lower part of the device there is a combustion residue accumulator - a replaceable combustion unit, which is easily reinstalled, which greatly increases the practicality of this equipment. The combustion unit must be cleaned periodically.
The device is recommended for use in rooms with forced ventilation.
The main advantages of a destructor are:
- absolute safety for the staff of the needle disposal process (accidental injuries and infection are excluded)
- the possibility of destroying the needle immediately after injection
- no need to remove the needle from the syringe
- practicality and durability
- compactness and economy
In order to minimize the risk of infection of medical staff, save resources when disposing of needles and comply with
occupational health and safety requirements, it is recommended to use a needle recycler in every medical office where
parenteral injections.
Specifications:
Overall dimensions: 230 × 150 × 100 mm
Weight, not more than: 1.2 kg
Voltage: 220±22V
Frequency: 50±0.5Hz
Power consumption, no more: 380 W
