Digital blood pressure monitor "MEDICARE" U80IH

Model U80IH

Specifications:

1. Description: automatic sphygmomanometer for measuring pressure on the forearm;
2. Display: digital LCD display;
3. Measurement principle: oscillometric;
4. Place of measurements: forearm;
5. Measuring range:

• pressure: 0 ~ 299mmHg (0 ~ 39.9kPa);
• pulse: 40 ~ 199 beats / min;

6. Accuracy:

• pressure: ± 3 mmHg Art. (± 0.4kPa);
• pulse: ± 5% of the indicator;

7.Display display:

• pressure: 3 digits mmHg Art.;
• pulse: 3 digits;
• symbols: memory / heartbeat / low battery;

8. Memory: 2x90 blocks of measured indicators;

9. Power supply: 4pcs AA batteries or DC 6V or AC power adapter;

10. Automatic shutdown: after 3 min;

11. Main unit weight: 348.7g (with batteries);

12. Main unit dimensions: L133mm x W103mm x H63mm;

13. Life span of the main unit: 5 years under normal use;

14. Accessories: cuff, user manual;

15. Working conditions:

• temperature from 5 to 40ºС;
• humidity from 15% to 85% relative humidity;
• pressure 86kPa - 106kPa;

16. Storage conditions: temperature from -20ºС to 55ºС;

17. Humidity: 10% to 85% RH;

18. During transport, avoid exposure to direct sunlight or rain.

Measurement procedure:

After you put on the cuff, you can start measuring:
1) Press the START / STOP button. All symbols will be displayed on the display, after 0 flashes for 2s, you will hear 2 short beeps, after that the pump will start to inflate the cuff, the increase in cuff pressure will be displayed on the display.

2) After the required pressure is reached, the pump will stop and the pressure will gradually decrease. The cuff pressure is shown on the display. If the blowing was insufficient, the machine will automatically start blowing air again.

3) After the device detects the signal, the symbol will flash on the display You will also hear beeps that are in rhythm with your heartbeat (one beep = one heartbeat).

4) After the measurement is completed, you will hear a long beep, the display will show the systolic and diastolic pressure and pulse rate.

5) The measurement values will be displayed on the display until you turn off the machine. If no buttons are pressed within 3 minutes, the machine will turn off automatically.

Note: the measurement results will be displayed in the units that were set when making the settings kPa or mmHg. If the display shows the symbol - during the measurement, an arrhythmia was detected.