EasyTouch test strips for measuring the level of uric acid in the blood (25 pcs)

The EasyTouch Blood Uric Acid Tester is designed to quantify uric acid in a fresh capillary blood sample. The measurement is based on determining changes in electric current caused by the reaction of uric acid with a reagent at the electrode of the strip.

When the blood sample lightly touches the sample area on the strip, the blood automatically moves to the reaction area on the strip. The test result is automatically displayed on the device display after 20 seconds.

Measuring range:

The measurement range of the EasyTouch blood uric acid tester is 3-20mg/dl or 179μmol/l to 1190μmol/l.

Reagents:

Each EasyTouch test strip contains the following reagents:

1. Uricase ≥ 0.1mg
2. Non-reactive ingredients ≥ 0.05mg

Storage:

1. Store test strips at: 4-32°C.
2. Keep away from direct sunlight and heat.
3. Do not freeze.
4. Do not use after the expiration date.
5. Write on the container the date it was opened.
6. Test strips must be used within 2 months from the date the container was opened.
7. Close the lid of the container tightly after removing the test strip.
8. Do not handle the test strip with wet or dirty hands.
9. Do not open, bend, scratch, or modify test strips in any way.

Determination of the level of uric acid in the blood:

Wash and dry your hands thoroughly. Insert the scarifier into the lancet device. Prepare lancing device according to instructions. In order to determine the level of uric acid, do the following:

Step 1: Remove the test strip from the container; close the lid of the container tightly immediately. Insert the test strip into the appropriate test strip hole, the machine will automatically turn on. The display will show a code for a certain period of time. Make sure the code on the machine's display matches the code on the test strip container. If the code does not match, code the machine correctly.

Step 2: Sample application. Get a drop of blood according to the procedure described in the instructions. The drop symbol will appear on the display, apply the blood sample to the sample area on the test strip. The blood will automatically move to the reaction zone of the test strip. The machine will start measuring the uric acid level.

Step 3: Check out the results in 20 seconds. The result is stored in the machine's memory automatically. Remove the test strip, after a while the device will turn off automatically.