Humidifier chamber standard, automatic filling, disposable
To provide humidification of the air flow to the breathing circuit for intubated and non-intubated patients. It is placed on the heating element of the air humidifier of any manufacturer.
There is a plug inside the chamber to prevent overfilling of the chamber with distilled water. For adults.
Specifications:
- Chamber material - polycarbonate;
- Transparent material for easy monitoring;
- Inlet/outlet port: 22mm M/F;
- Effective volume - 400 ml;
- Working volume - 230 ml;
- Maximum water level: 140 ml;
- Maximum flow rate: 170 l/min;
- Air resistance: 0.69cm/H2O;
- Compliance: 0.35ml/cm H2O;
- Moisture output: >33mg/L;
- non-sterile;
- Heating board diameter: 8.5cm, outlet diameter 12.2cm;
- For single use;
- Shelf life 5 years from the date of manufacture indicated on the package;
- Individual packing.
Size:
Instructions for use:
- The chamber with the breathing circuit is attached to the ventilator as prescribed by the doctor;
- Fill the chamber with distilled water up to the upper mark "Max.Level" (maximum level);
- Distilled water is added through an IV system;
- Install the chamber on the heating element of the humidifier;
- Connect through the inhalation tube of the breathing circuit to the ventilator and to the inhalation tube through which the respiratory mixture goes to the patient;
- Do not re-sterilize the product;
- After use, dispose of in accordance with established regulations.
