Purpose:
To heat the water in the humidifier chamber, as well as the gas coming from the ventilator to ensure optimal humidity and temperature in the breathing circuit for patients requiring mechanical ventilation, in which the level of gas supply remains constant.. The product operates in two modes: with and without servo control . In mode
servo control has 2 heating systems.
Specifications:
- Mains voltage: 100-120 Vac or 200-240 Vac;
- Power supply frequency: 50/60 Hz;
- Fuse rating: F4 A/250Vac for 90-120Vac / 200-240Vac;
- Maximum power consumption: 350 VA;
- Overheating protection: when the heating temperature reaches more than 120 C + - 7C, the power supply of the product turns off automatically;
- Turn off the product: unplug the power cord from the socket;
- Transportation conditions: temperature from -10 to +50 С; humidity 5%-95% without water condensation;
- Storage conditions: temperature from -10 to +50 C; humidity 5%-95% without water condensation;
- Complies with standards: IEC-60601-1, IEC-60601-1-2;
- Classified: class I, type B, IPX0;
- Operating conditions: ambient temperature 18-26 C, ambient pressure 700 hPa to 1060 hPa.
- Warm-up time: more than 30 min.
The package includes:
- Temperature sensor
- Heating line
- Power adapter for reusable circuits
Dimensions:
16.0cm*14.5cm*13.5cm;
Weight 1.48 kg.
Note: For disposable circuits, the power adapter is sold as a separate item.
Power adapter for disposable heating wires
To transfer power from the heating wire in the disposable breathing circuit to heat the air flow from the ventilator to the patient airway.
Technical specifications:
- Wire length 0.5 m from connector to inspiratory tube connector;
- 4-pin for 90° heating wire socket;
- Inspiratory tube connector 3 pins (for heating tubes
- single use);
- Reusable;
- Individual packing.
