Endotracheal tube (with cuff and suction port) "MEDICARE" size 9.0

1. The tube is made of polyvinyl chloride;
2. Does not contain latex;
3. Built-in port (aspiration catheter) for sanitation;
4. High volume low pressure cuff;
5. Connector with "ears" for fixing;
6. Radiopaque strip in the wall of the tube;
7. At the distal end of the tube is Murphy's window;
8. Intubation depth scale;
9. The working surface is numbered with an interval of 1 cm;
10. Sterile, non-pyrogenic, non-toxic;
11. For single use;
12. Individual packing;
13. Shelf life 5 years from the date of manufacture indicated on the package.

Dimensions:

• 6.0mm; 6.5mm; 7.0mm; 7.5mm; 8.0mm; 8.5mm; 9.0mm; 9.5mm.

Instructions for use:

1. Completely deflate the cuff prior to intubation to facilitate insertion and prevent damage to the patient's airway;
2. After intubation, inflate the cuff with a minimum volume of air to ensure a tight seal;
3. Immediately after filling the cuff with air, auscultate the lungs, if breathing is disturbed, adjust the position of the tube;
4. Set the necessary parameters of IVL;
5. If necessary, remove the secret with a syringe through the suction port;
6. Before removing the tube with a syringe, remove air from the cuff;
7. After the end of the procedure, dispose of the tube in accordance with established standards.