Used in general anesthesia, intensive care and emergency care for airway management, oral intubation and mechanical ventilation. The tube is inserted into the patient's trachea through the patient's nose or mouth, to ensure that the airway is clear and air enters the lungs.
Specifications:
- The tube is made of polyvinyl chloride;
- High volume low pressure cuff;
- Connector with "ears" for fixing;
- Radiopaque strip in the wall of the tube;
- At the distal end of the tube is Murphy's window;
- Intubation depth scale;
- The working surface is numbered with an interval of 1 cm;
- Sterile, non-pyrogenic, non-toxic;
- For single use;
- Individual packing;
- Shelf life 5 years from the date of manufacture indicated on the package.
Dimensions: 3.0mm; 3.5mm; 4.0mm; 4.5mm; 5.0mm; 5.5mm; 6.0mm; 6.5mm; 7.0mm; 7.5mm; 8.0mm; 8.5mm; 9.0mm; 9.5mm; 10.0mm.
Instructions for use:
- Check the integrity of the sterile packaging;
- Before the introduction of the endotracheal tube, it is necessary to ensure the integrity of the cuff;
- Check the reliability of fixing the connector with the tube;
- An endotracheal tube must be inserted into the trachea using a laryngoscope or fiberoptic bronchoscope through an open glottis;
- The cuff should be positioned in the upper trachea;
- Inflate the cuff with air through the pilot balloon using a syringe;
- Fix the endotracheal tube in the desired position;
- After intubation through the pilot balloon is completed, remove air from the cuff using a syringe;
- Remove tube and dispose of properly.
