Reusable silicone laryngeal mask “MEDICARE” size 1.0

Specifications:

1. Mask, air duct, pressure tube, pilot bottle are made of silicone, valve - polypropylene and stainless steel, polysulfone connector;
2. The integral design of the mask smoothly transitions from the tube to the soft cuff;
3. Equipped with a soft inflatable cuff that provides a secure fit while minimizing the risk of damage to the tissues of the oropharynx;
4. The transparency of the material allows you to determine the blockage of the lumen;
5. The size range allows to use for adults, children and babies;
6. Sterile, non-pyrogenic, non-toxic;
7. For multiple use (sterilization up to 40 times in an autoclave at a temperature of 134 ° C);
8. Individual packing.

Instructions for use:

1. The laryngeal mask is a reusable product;
2. Choosing the right mask size is important;
3. It is necessary to use a syringe to fill the cuff of the laryngeal mask with air and when removing air from the cuff. The cuff of the laryngeal mask must be completely deflated before autoclaving.
4. Autoclaving is carried out up to 40 times;
5. Lubricate the posterior surface of the cuff with lubricant before inserting the laryngeal mask. Do not lubricate the front of the cuff as this may cause aspiration of the lubricant;
6. Be sure to use gloves;
7. The anesthesia must be deep enough for successful insertion of the laryngeal mask.
8. Position the head and neck as in normal intubation. Keeping the head thrown back - with one hand, the mask is inserted with the other hand;
9. Hold the laryngeal mask like a pen, with the index finger at the junction of the cuff with the tube. Press the laryngeal mask against the hard palate and make sure that the end of the mask is not bent before further advancement of the mask into the pharynx. In one motion, pressing the mask to the back of the throat in order to avoid contact with the epiglottis, insert the mask completely. Try to avoid introducing the mask in several movements or jerks. When resistance is felt, the mask is in the right place. With the other hand, you can verify the correct position of the mask by gently touching the larynx.
10. Make sure the black stripe on the tube is facing towards the upper lip. Then immediately inflate the cuff of the mask with air, holding the laryngeal mask by the tube. This must be done before connecting the ventilator to allow the laryngeal mask to self-adjust to the correct position.
11. Connect the ventilation unit carefully. Make sure that the position of the mask is correct and that the lungs are ventilated. Insert bite block. Fix the laryngeal mask with adhesive tape or bandage.