Disposable silicone laryngeal mask "MEDICARE" size 1

Specifications:

1. Mask, air duct, pressure tube, pilot balloon and valve are made of silicone, connector is made of polypropylene;
2. The integral design of the mask smoothly transitions from the tube to the soft cuff;
3. Equipped with a soft inflatable cuff that provides a secure fit while minimizing the risk of damage to the tissues of the oropharynx;
4. The transparency of the material allows you to determine the blockage of the lumen;
5. Size range allows use in adults, children and infants;
6. Sterile, non-pyrogenic, non-toxic;
7. For single use;
8. Individual packing.

Instructions for use:

1. Choosing the right mask size is important;
2. Lubricate the posterior surface of the cuff with lubricant before inserting the laryngeal mask. Do not lubricate the front of the cuff as this may cause aspiration of the lubricant;
3. Be sure to use gloves;
4. Anesthesia must be deep enough for successful insertion of the laryngeal mask;
5. Position the head and neck as in normal intubation. Keeping the head thrown back - with one hand, the laryngeal mask is inserted with the other hand;
6. Hold the mask like a pen, with the index finger at the junction of the cuff with the tube. Press the laryngeal mask against the hard palate and make sure that the end of the mask is not bent before moving further into the larynx. In one movement, pressing the mask against the back wall of the larynx in order to avoid contact with the epiglottis, insert the mask completely. Try to avoid introducing the mask in several movements or jerks. When resistance is felt, the mask is in the right place. With the other hand, you can make sure that the mask is in the correct position by gently moving the larynx.
7. Make sure the black stripe on the tube is facing towards the upper lip. Then immediately inflate the cuff of the mask with air, holding the laryngeal mask by the tube. This must be done before connecting the ventilator to allow the laryngeal mask to self-adjust to the correct position.
8. Connect the ventilation unit carefully. Make sure that the position of the mask is correct and that the lungs are ventilated. Insert bite block. Fix the laryngeal mask with adhesive tape or bandage.