Pulse oximeter "MEDICARE"
Pulse oximetry is a non-invasive method for determining the degree of blood oxygen saturation.
A modern pulse oximeter is a small "clothespin" sensor worn on the finger.
The method is based on a spectrophotometric method for determining blood oxygen saturation. Pulse oximeter is a portable, non-invasive device for determining arterial hemoglobin oxygen saturation (SpO2) and pulse rate in adults and children, both at home and in the clinic (in therapeutic / surgical practice, anesthesia and resuscitation, etc.).
Specifications:
- Display type: OLED display
- SpO2 measurement range 70% -100%;
- Temperature range in operation mode: from 4 ° C to 40 ° C;
- Accuracy ± 2% in the range of 70% -99%;
- Pulse measurement range: 25-250 bpm;
- Accuracy: ± 1 bpm or ± 1% (greater)
- Power consumption: two AAA 1.5V alkaline batteries;
- Voltage range: 2.6-3.6V;
- Low power consumption: less than 30 mA;
- Measurement accuracy: SpO2 accuracy ± 2% in the range of 70% -99%;
- Not determined for indicators less than 70%;
- Pulse rate ± 1 bpm or ± 1% (greater);
- Taking measurements in a low perfusion state: pulse wave is available without failure when pacing the pulse wave amplitude is less than 6%;
- Ambient Light Noise Immunity: The difference between measurements in natural light with indoor lighting and those measured in low light conditions is less than 1%;
- The device will automatically turn off if there is no signal for more than 8 seconds
- Dimensions: length - 58 mm, width 32 mm;
- Weight: 54g (including two AAA batteries)
- Environmental requirements: operating temperature range: 4°C to 40°C;
- Temperature range in storage mode: from -10 ° C to 40 C.
