Single-use injection needle is used for subcutaneous injections and injections for children; for insulin injections; in dentistry; ophthalmology; for mesotherapy.
In the standard version, the BogMark factory completes 1 ml 40U and 1 ml 100U insulin syringes with a 1.2x40 needle.
In mesotherapy, 1.2x40 needles are used to administer colloid preparations to fill in wrinkles.
Subcutaneous injections are made with a needle of the smallest diameter to a depth of 15 mm and up to 2 ml of drugs are injected, which are quickly absorbed in loose subcutaneous tissue and do not have a harmful effect on it.
For subcutaneous injections, you can also use a slightly larger needle - 0.5 mm, 16 or 25 mm long.
General characteristics
- The needle is suitable for Luer and Luer-Lok connections.
- The needle is coated with a special silicone lubricant, sharpened in three planes according to the ISO7864 standard.
- The color of the plastic part of the needle indicates its outer diameter.
- The needle is sterile, non-toxic, non-pyrogenic. For single use.
Peculiarities
- Cannula: made of AISI 304 high alloy steel, diameter and length of the needle according to ISO 9626 standards
- Cannula sharpening: trihedral sharpening, provides a painless injection. The needle is ground according to special technology (ISO 7864).
- Polishing of a needle on length - electrolytic and ultrasonic polishing.
- Needle lubrication is a special silicone compound according to ISO7864.
- Needle base: made of polypropylene, color coded according to ISO 6009.
- Fastening the needle with a plastic base - special glue.
