17477 One-component urostomy bag Alterna No. 30 transparent, 10-55mm 375ml

• A plate with a two-layer spiral-shaped hydrocolloid adhesive ensures reliable adhesion and protection of the skin;
• the colostomy plate is thickened at the stoma and becomes thinner towards the edges;
• due to the thinned ribbed edge, the plate follows the relief of the skin and body, does not interfere with movement;
• adheres well to the unevenness of the body and skin;
• the soft non-woven backing of the bags allows the skin under the bag to "breathe" and protects it from irritation.

The highly efficient bag structure prevents backflow of contents into the urostomy. This reduces the risk of infection in the urinary tract.

The bag is equipped with a drain valve made of soft plastic. The valve is hygienic to use, easy to open and close tightly.

1. It is necessary to cut a hole in the plate of the urostomy bag according to the shape and size of the stoma
2. Remove the protective coating from the plate in order to ensure that the plate adheres to the skin. Please note that the outlet (valve) must be closed.
3. Make sure the skin around the stoma is clean and dry. Place the device with the adhesive plate against the body. Gently put on the urostomy bag and lightly press the plate against the skin.
4. When filling the bag with urine more than 1/3, it is necessary to empty it. To do this, open the outlet and empty the bag. Wipe the outlet with a clean cloth to remove any remaining contents and close again.
5. To prevent skin irritation from exposure to urine, a protective sealant paste must be used on the skin.
6. For ease of use of the urostomy bag and increase in volume, the bag can be attached to any bedside or leg urinal bag. To do this, use the connector that comes with the urostomy bags to attach the urostomy bag to the urinal bag.