Faucet 3-way "Medicare"

The 3-way stopcock "MEDICARE" is intended for intravenous administration of solutions, to provide an additional site for the introduction of drugs during long-term and intermittent intravenous infusion therapy.

Specifications:

1. Body transparent for flow visualization;

2. Designation of the flow direction in the form of arrows;

3. Luer-Lock adapter and injection port;

4. Rotate the faucet by 3600;

5. At the ends of the faucet, rotating safety caps with internal thread;

6. Made of medical plastic, manufacturing materials:

- tee - polycarbonate;
- handle - HDPE 50 MA 180;
- cap - PVC TFG 100B;

- Luer Lock connector - polyethylene;

7. Sterile, non-toxic, non-pyrogenic;

8. Individual packing;

9. For single use.

Instructions for use:

1. Visually check that the packaging is not damaged.
2. Pull the 3-way stopcock out of the package.
3. Properly connect one or two infusion lines to the ports.
4. Remove the protective cap from the connector and hold it upright.
5. Open the clamps of the infusion lines and squeeze out the air completely by opening the faucet.
6. Close the faucet by turning it to the "close" position.
7. Connect the stopcock to the vascular access device and fix it.
8. Return the faucet to the "open" position and adjust the infusion flow rate.
9. At the end of the manipulation, dispose of in the prescribed manner.