The infusion system PR is designed for intravenous infusion of infusion solutions from glass vials and plastic containers.
PR device complete set :
1.Injection needle 0.8x38mm (21Gx11/2).
2. Connection "Luer".
3.Latex connector.
4.PVC tube.
5.Plastic clip with roller.
6.Plastic cylinder with mesh filter.
7. Needle (thorn) for penetration into the container.
8.Optional: metal air needle to get air into the container.
Technical characteristics of the PR system :
- The working length of the device is 1520±30 mm.
- The dropper is made of a transparent semi-rigid material to control the liquid level and the dropping rate of the solution, as well as to eliminate the possibility of bending the tube.
- The injection needle has a special surface coating and triple sharpening for painless injection.
- The air duct consists of a needle and an air valve with a hydrophobic membrane that does not allow bacteria to pass through.
- The mesh filter ensures the retention of particles with a diameter of more than 29 microns, eliminates the risk of foreign impurities entering the patient's blood.
- Roller infusion rate regulator regulates infusion from drip to jet modes.
- There is a rubber adapter for additional bolus administration of drugs.
- The Luer connection is adapted to injection needles, peripheral and central catheters.
- Sterilized with ethylene oxide.
Shelf life : 5 years.
Read more: https://shprici.com.ua/p118986582-sistema-infuzionnaya-dlya.html
