Mn-Sn: | 8:00 - 21:00 |
Shopping cart | 24/7 |
the combination plastic needle is made using the "pencil point" technology, which reduces the risk of cork fragmentation and the likelihood of needle blockage.
the system does not have an air intake needle, its functions are performed by the air intake valve of the liquid filter housing.
The air intake valve of the system tank is equipped with a waterproof membrane to clean the air. The membrane is made of fiberglass, the percentage of air purification is 95% (the standard is at least 90%), which reduces the risk of violating the sterility of the injected solution
Sterile transfusion blood transfusion system is equipped with a nylon liquid microfilter with the smallest possible cell diameter of 200 μm, which does not prevent the passage of blood cells, preserves their integrity (the degree of hemolysis is up to 1% at a standard of 5%) and at the same time purifies colloidal solutions from possible impurities. (flow rate 1100 ml/10 min with standard 1000 ml/10 min).
roller regulator smoothly changes the rate of administration: 20 drops = 1 ml.
transparent connecting tubes allow you to control the transfusion procedure.
a latex or non-latex injection site allows for bolus injections.
the Luer connection is adapted to injection needles, peripheral and central venous catheters.
the combination plastic needle is made using the "pencil point" technology, which reduces the risk of cork fragmentation and the likelihood of needle blockage.
the system does not have an air intake needle, its functions are performed by the air intake valve of the liquid filter housing.
The air intake valve of the system tank is equipped with a waterproof membrane to clean the air. The membrane is made of fiberglass, the percentage of air purification is 95% (the standard is at least 90%), which reduces the risk of violating the sterility of the injected solution
Sterile transfusion blood transfusion system is equipped with a nylon liquid microfilter with the smallest possible cell diameter of 200 μm, which does not prevent the passage of blood cells, preserves their integrity (the degree of hemolysis is up to 1% at a standard of 5%) and at the same time purifies colloidal solutions from possible impurities. (flow rate 1100 ml/10 min with standard 1000 ml/10 min).
roller regulator smoothly changes the rate of administration: 20 drops = 1 ml.
transparent connecting tubes allow you to control the transfusion procedure.
a latex or non-latex injection site allows for bolus injections.
the Luer connection is adapted to injection needles, peripheral and central venous catheters.