Single use device. It is intended for infusion of blood substitutes and infusion solutions.
The device is completed with an injection needle with an outer diameter of 0.8 mm, which has an atraumatic sharpening. The connecting cone of the needles is "Luer".
Smooth regulation of transfusion speed from drip to jet mode is provided by a roller clamp.
The injection unit of the device is a latex tube and provides self-tightening when pierced six times in different places with a needle with a diameter of 0.8 mm.
The connections of the parts of the device without an injection needle are sealed at a minimum internal overpressure of at least 40 kPa. The connections of the tubes of special needles with the heads of the needles withstand a tensile load of at least 50 N. The remaining connections of the device - at least 20 N.
The air inlet has a filter to filter the incoming air from microorganisms.
The dimensions of the device are not less than: length of the device - 1500 mm; injection needle length - 28 mm; the length of the needle to the container is 30 mm.
The design of the drop-forming element ensures the formation of 20 drops from 1.0+0.1 g of distilled water at a temperature of 20+2 °C.
The needle for connecting to the tank is metal. Packaging - plastic bag.
The packaging contains information in two languages - Ukrainian and Russian.
The device is sterile, non-pyrogenic, non-toxic.
Guaranteed shelf life - 3 years from the date of manufacture.
