Mn-Sn: | 8:00 - 21:00 |
Shopping cart | 24/7 |
The knee brace is intended for use during an osteoarthritis flare-up. When morphological changes appear in the lower extremities, it is necessary to purchase a knee brace to correct the patient's condition.
Thanks to the anatomical shape of the orthosis, it is possible to make its use as comfortable as possible. In the production of the Orliman OCR300 knee splint, hypoallergenic materials were used that allow air and heat to pass through. Even in hot weather, the use of a splint will not bring discomfort.
The principle of operation of the splint is to reduce the load on the knee. Load reduction occurs due to the redistribution of body weight. Depending on the type of injury, the redistribution of the load with the help of a splint occurs on healthy tissues, due to which the damaged parts of the joint are restored.
The retainer can be put on independently thanks to a special system of fasteners. To adjust the angle of flexion and extension of the articular orthosis, it is necessary to use a special hinge.
In the manufacture of the knee brace, high-quality plastic was also used. Inside the plastic latch is a soft lining for more comfortable use.
The special design of the joint retainer and rigid fixation on the leg allow you to achieve the effect of using the joint retainer in the shortest possible time. Also, the knee splint has the following features:
1. The design type provides for the possibility of adjusting varus and valgus.
2. The design provides a hinge to adjust the angle of flexion and extension of the leg.
3. For tight fixation of the splint on the lower leg and thigh, rigid cuffs are used.
4. To give the Orliman OCR300 orthosis an anatomical shape, taking into account the characteristics of the patient, special Velcro is used. With Velcro, you can control the degree of pressure on the limb.
5. Fastening of the joint retainer on the leg occurs with the help of special fasteners.
6. The fixator of the joint can be used to stabilize, improve the functional state of the knee. With specific injuries, using a knee brace can limit the degree of movement of the joints, speed up the recovery process.
Type of orthopedic device: knee brace.
Size: universal.
Black color.
Material for the manufacture of structural elements: plastic, hypoallergenic fabric material.
Method of fixation on the leg: Velcro, fasteners.
Producer: Orliman (Spain).
The knee brace is intended for use during an osteoarthritis flare-up. When morphological changes appear in the lower extremities, it is necessary to purchase a knee brace to correct the patient's condition.
Thanks to the anatomical shape of the orthosis, it is possible to make its use as comfortable as possible. In the production of the Orliman OCR300 knee splint, hypoallergenic materials were used that allow air and heat to pass through. Even in hot weather, the use of a splint will not bring discomfort.
The principle of operation of the splint is to reduce the load on the knee. Load reduction occurs due to the redistribution of body weight. Depending on the type of injury, the redistribution of the load with the help of a splint occurs on healthy tissues, due to which the damaged parts of the joint are restored.
The retainer can be put on independently thanks to a special system of fasteners. To adjust the angle of flexion and extension of the articular orthosis, it is necessary to use a special hinge.
In the manufacture of the knee brace, high-quality plastic was also used. Inside the plastic latch is a soft lining for more comfortable use.
The special design of the joint retainer and rigid fixation on the leg allow you to achieve the effect of using the joint retainer in the shortest possible time. Also, the knee splint has the following features:
1. The design type provides for the possibility of adjusting varus and valgus.
2. The design provides a hinge to adjust the angle of flexion and extension of the leg.
3. For tight fixation of the splint on the lower leg and thigh, rigid cuffs are used.
4. To give the Orliman OCR300 orthosis an anatomical shape, taking into account the characteristics of the patient, special Velcro is used. With Velcro, you can control the degree of pressure on the limb.
5. Fastening of the joint retainer on the leg occurs with the help of special fasteners.
6. The fixator of the joint can be used to stabilize, improve the functional state of the knee. With specific injuries, using a knee brace can limit the degree of movement of the joints, speed up the recovery process.
Type of orthopedic device: knee brace.
Size: universal.
Black color.
Material for the manufacture of structural elements: plastic, hypoallergenic fabric material.
Method of fixation on the leg: Velcro, fasteners.
Producer: Orliman (Spain).