The Mikroneb compressor inhaler is used for aerosol therapy for diseases of the upper and lower respiratory tract. It is effective in the prevention and treatment of such diseases as pharyngitis, laryngitis, rhinosinusitis, tracheitis, bronchitis, asthma, pneumonia, as well as in acute respiratory viral infections.

Due to the small particle size of the aerosol, the maximum effect is achieved during inhalation!

Before using the device for the first time, it is recommended to clean it following the recommendations outlined in the "Cleaning and Disinfection" section of the instruction manual.

How to use:

1. Assemble the MIKRONEB Nebulizer and make sure all parts are in place.

2. Fill the aerosol chamber with inhalation liquid as directed by your healthcare professional. Make sure you do not exceed the maximum level marks when pouring liquid.

3. Connect the air supply tube of the MIKRONEB nebulizer to the compressor and plug into the power outlet.

4. To turn on the device, turn the ON / OFF switch to position "I", and take the mouth-nose combo nozzle into your mouth or put on a personal mask on your face. Thanks to this nozzle, drugs penetrate into the lungs better. Choose the appropriate mask: for adults or for children; make sure it completely covers the mouth and nose.

5. During inhalation therapy, breathe calmly. Relax, sit in a comfortable position, while your torso should remain upright. Inhalation procedures should not be taken lying down. If during the procedure you feel discomfort or feel unwell, stop the procedure immediately.

6. After completing the inhalation session, turn off the device, then switch the “ON / OFF” switch to the “O” position and disconnect the power cord from the electrical outlet.

7. Remove drug residues from the aerosol generation chamber and clean the device following the instructions in the Cleaning and Disinfection section of the instructions for use.