ULAIZER™ PRO

This is a compact medical device designed for the effective delivery of a drug prescribed by a doctor to the bronchopulmonary tract. With proper care and use, it will work reliably for many years.

This device is designed to successfully treat asthma, bronchitis and other respiratory diseases. The nebulizer creates an air stream that follows through the tube to the nebulizer chamber. When air enters the chamber, it turns the prescribed drug into a fine aerosol cloud for easy inhalation.

You should only use the medicines prescribed by your doctor in your compressor inhaler. We ask you to carefully read this manual to familiarize yourself with the characteristics of the device. Any unauthorized use of the device should always be avoided.

2. DESCRIPTION OF THE DEVICE AND COMPLETE PACKAGE*

* The appearance of the device may differ slightly from the image on the packaging

3. IMPORTANT SAFETY PRECAUTIONS

Note: Please read all instructions carefully before use. When using an electrical device, the following basic safety precautions are required.

Caution: Failure to read and understand all safety precautions may result in personal injury or equipment damage.

Caution regarding the use of the device:

1. To avoid electrical shock:
   • Keep the device away from water.
   • Do not immerse the power cord or device in liquid
   • Do not use while taking a bath
   • Do not pull out a device that has fallen into water - immediately unplug it from the outlet.
2. Never use the device with damaged parts (including the power cord), or if it has been dropped or submerged in water. Take it to a service center for inspection and repair immediately.
3. The device must not be used where flammable gases, oxygen or aerosol sprays are used.
4. Before cleaning, filling and after each use, unplug the device from the socket.
5. Do not use accessories other than those recommended by the manufacturer.

Safety measures at work:

1. Connect this appliance to the correct electrical outlet for your model.
2. Do not leave this device unattended.
3. Never turn on the device if there is a damaged power cord or socket, if it has been dropped or submerged in water in any way, it will not work properly. Take it to a service center for repair.
4. If there is any abnormality, immediately discontinue use until the device has been inspected and repaired.
5. Always unplug from electrical outlet immediately after use.
6. Never block the air outlet or intake vents, and do not place it where these vents can be blocked.

Storage instructions:

1. Do not store the device in direct sunlight, high temperature or high humidity.
2. Keep the device away from children.
3. Always keep your device turned off when you are not using it.

Cleaning Instructions:

1. Do not immerse the device in water. This may harm the device.
2. Unplug the appliance from the electrical outlet before cleaning.
3. Clean all necessary parts after each use according to these instructions.

4. WORKING WITH YOUR COMPRESSOR INHALATOR

1. Place your compressor inhaler on a flat, stable surface. Make sure you can easily reach the controls when you are seated.
2. Get your accessories ready.

Important: Thoroughly clean the inhaler before use according to the "Cleaning Instructions" in this manual.

3. Carefully unscrew the top of the nebulizer kit counterclockwise to disassemble it.
4. Fill the bottom of the chamber with the medicine prescribed by your doctor. Make sure the cone is placed inside the bottom. Place the cone inside and fill the chamber with medicine.
5. Carefully screw the top of the chamber clockwise to assemble the nebulizer chamber. Make sure the two compartments are well connected.
6. Connect one end of the air tube to the base of the nebulizer kit.
7. Connect the other end of the air tube to the air tube connector on the front of the instrument.
8. Attach the mouthpiece to the upper compartment of the camera.
9. Plug the power cord into an appropriate electrical outlet. Make sure the switch is in the "OFF" position at this stage.
10. Press the switch to start the treatment session. Important: The compressor motor has a thermal protection device that turns off the compressor before it overheats. When the thermal protection device turns off the compressor:
    • Switch off the appliance.
    • Disconnect the appliance from the electrical outlet.
    • Before the next treatment session, wait 30 minutes for the motor to cool down. Make sure the holes are not blocked.
11. After finishing treatment, turn off the device and unplug it from the electrical outlet.

5. CLEANING

It is recommended that you thoroughly clean the chamber and mouthpiece with hot water after each use and clean them with a mild detergent after the last treatment of the day. If your doctor or machine service technician uses a different cleaning procedure, follow their instructions.

Rinsing (after each use)

1. Disconnect the air tube, chamber and mouthpiece.
2. Gently twist the nebulizer chamber to open it.
3. Rinse the camera and mouthpiece with water.
4. Dry them with a clean soft towel or hang them to air.
5. When the inhaler is dry, reassemble it and put the parts in a dry place.

Disinfection:

Please follow the instructions below for disinfecting your inhaler unless otherwise directed by your doctor. It is recommended to disinfect the device after the last treatment of the day.

1. Make a solution of one part white vinegar to three parts distilled water. Make sure there is enough solution to dip the nebulizer kit and mouthpiece into.
2. Go through cleaning steps 1-3.
3. Wash the camera and mouthpiece in warm water with a mild detergent. Then rinse them in hot tap water.
4. Soak these parts in a water-vinegar solution for thirty minutes.
5. Go through cleaning steps 3-5.

Compressor cleaning

1. Wipe the compressor daily with a damp cloth.
2. Do not use aerosol cleaners that may damage the device.

Filter replacement

1. Do not use cotton or other materials. Do not wash or clean the filter. Use only filters from your distributor. Do not run the device without a filter.
2. Replace the filter every 30 days or when the filter turns grey.
3. Replacement procedure: remove the filter cover, replace the used filter with a new one, close the filter cover.

6. REPLACEMENT PARTS AND ACCESSORIES TO ORDER

Replacement parts can be purchased through your local dealer. Custom accessories include masks for adults and children, nasal prongs, additional inhalers, mouthpieces, filters, air tubes, and more.

7. TECHNICAL SPECIFICATIONS

Electric shock protection, class II equipment

BF-type working parts: mouthpiece, masks.

Alternating current

Attention: see the instruction manual;

In order to protect the environment, at the end of its life, this appliance must be handed over to a specialized collection point for electrical equipment, and not thrown into the trash.

IPX0 (Normal) - Protection against harmful water ingress

Without AT/ATG - Level of protection when flammable anesthetics or oxygen are present (Do not use when flammable anesthetics or oxygen are present)