Mn-Sn: | 8:00 - 21:00 |
Shopping cart | 24/7 |
Lightweight orthopedic orthosis with ergonomic design is used for stabilization and posture correction, made of breathable materials.
The back consists of a semi-rigid textile base and an aluminum plate that is height adjustable. The orthosis adapts to the individual curves of the back and, thanks to its special design, forms an anatomical posture and properly controls the alignment of the spine. The anterior zone has semi-rigid elements to increase intra-abdominal pressure and provide a stable base for postural correction. Both components are connected by a system of straps which, once adjusted, can reduce the characteristic kyphotic curvature of the osteoporotic patient.
Aluminum plate, adjustable in length, for the correct adaptation of the orthosis in height, depending on the individual characteristics of the patient.
The plate is adjusted using four screws (which require a 2.5mm hex wrench - wrench included).
Front closure system designed to provide an optimal fit and maximum comfort, because after the first adjustment, the shape of the orthosis is maintained and subsequent dressings take place only with the front closure system without further adjustment.
Peculiarities:
Effect:
Appointments:
Manufacturer country:
Orliman Spain
Lightweight orthopedic orthosis with ergonomic design is used for stabilization and posture correction, made of breathable materials.
The back consists of a semi-rigid textile base and an aluminum plate that is height adjustable. The orthosis adapts to the individual curves of the back and, thanks to its special design, forms an anatomical posture and properly controls the alignment of the spine. The anterior zone has semi-rigid elements to increase intra-abdominal pressure and provide a stable base for postural correction. Both components are connected by a system of straps which, once adjusted, can reduce the characteristic kyphotic curvature of the osteoporotic patient.
Aluminum plate, adjustable in length, for the correct adaptation of the orthosis in height, depending on the individual characteristics of the patient.
The plate is adjusted using four screws (which require a 2.5mm hex wrench - wrench included).
Front closure system designed to provide an optimal fit and maximum comfort, because after the first adjustment, the shape of the orthosis is maintained and subsequent dressings take place only with the front closure system without further adjustment.
Peculiarities:
Effect:
Appointments:
Manufacturer country:
Orliman Spain