It is used for various modes (alternating, simultaneous, sequential) of intravenous infusions in chemotherapeutic, oncohematological, anesthetic, resuscitation and other departments. Reduces the risk of medical personnel error, prevents violations of asepsis rules, eliminates inconvenience, saves time and additional funds.
Specifications:
- Made from polyvinyl chloride;
- Tube length not less than 1450 mm;
- Two plastic needles with an air duct for connecting to two different bottles;
- Two flow regulators;
- Drip chamber with filter;
- Connection type Luer lock for connection to an intravenous catheter;
- Sterile, non-pyrogenic, non-toxic;
- For single use;
- Individual packing;
- Shelf life 5 years from the date of manufacture indicated on the package.
Instructions for use:
- Open the individual packaging, close all flow regulators, remove the protective caps from the needles, insert the needles into containers with infusion solutions.
- Open one additional and main speed regulators and fill the drip chamber to 2/3 of the volume, remove air from the flexible tube, close the general speed regulator, after which the system is ready for use.
- Connect the system to the patient's IV catheter.
- Open the 2nd additional flow regulator (while closing the 1st additional flow regulator) and remove air from the 2nd additional flexible tube - and the system is ready to continue infusion.
- Infusion, depending on the specific clinical situation, should be carried out alternately, sequentially or simultaneously, opening or overlapping combinations of flow rate regulators.
- In accordance with the requirements, adjust the rate of injection of the solution (20 drops of liquid that is injected is equal to 1 ml ± 0.1 ml).
- After use, dispose of the system in accordance with established regulations.
