Disposable systems for transfusion of infusion solutions "MEDICARE" (Luer Lock)

Specifications:

• Made from polyvinyl chloride;
• Tube length not less than 1450 mm;
• Four plastic needles with an air duct for connecting to four different bottles;
• Four flow regulators;
• Connection type Luer lock for connection to an intravenous catheter;
• The system is assembled;
• Sterile, non-pyrogenic, non-toxic;
• For single use;
• Individual packing;
• Shelf life 5 years from the date of manufacture indicated on the package.

Instructions for use:

1. Open the individual packaging, close all flow regulators, remove the protective caps from the needles, insert the needles into containers with infusion solutions.
2. Open one additional and main speed regulators and fill the drip chamber to 2/3 of the volume, remove air from the flexible tube, close the general speed regulator, after which the system is ready for use.
3. Connect the system to the patient's IV catheter.
4. Open the second additional flow regulator (at the same time close the 1st additional flow regulator) and remove air from the 2nd additional flexible tube - and the system is ready to continue infusion.
5. Also carry out infusion through the third and fourth infusion channels.
6. Infusion, depending on the specific clinical situation, should be carried out alternately, sequentially or simultaneously, opening or overlapping combinations of flow rate regulators.
7. In accordance with the requirements, regulate the rate of administration of the solution (20 drops of liquid that is administered is equal to 1 ml ± 0.1 ml).
8. After use, dispose of the system in accordance with established regulations.