Anti-bedsore sectional mattress with static function
Anti-decubitus mattress MED1-M01-2 with a static function is an effective means for the prevention and treatment of grade 1-2 pressure ulcers. The anti-decubitus system consists of a compressor and a fabric made in the form of tubes connected to each other. This bedsore mattress has a static function, which makes it more convenient to use. Using a mattress will improve blood circulation in soft tissues, prevent tissue death, provide oxygen access to the entire skin and ensure uniform distribution of pressure on the human body.
The principle of operation of the mattress is that the compressor supplies air to the sheet, alternately inflating the sections, which creates the feeling of a light massage and this is a dynamic mode. In static mode, the mattress is fully inflated and the massage stops; it can remain in this position for the required time. The advantage of the static function is that after stopping the massage, the patient does not need to be taken out of bed to resume work.
Anti-decubitus mattress MED1-M01-2 with static function can be used for:
- paralysis;
- the patient is in the intensive care unit or intensive care unit;
- injuries and fractures, with the recommendation of the attending physician;
- old age;
- sedentary lifestyle.
The anti-bedsore system consists of:
- compressor, which is made of high-quality components, it has protection against short circuits and voltage surges. The fuse is located on the compressor housing for convenience; replacement will take a few minutes;
- canvas consisting of tube sections. The mattress canvas is protected by a nylon cover, which is easy to clean; the material does not allow liquids to pass through, does not accumulate odors and does not allow bacteria to develop;
- PVC connecting pipes for connecting the compressor to the canvas. PVC is an elastic material that is odorless and very elastic, increases the service life of the product by not drying out or cracking. An innovation is the presence of a plug, which will keep the mattress inflated for some time during a power outage.
The bedsore mattress has the following dimensions:
- width 90 cm;
- length 200 cm;
- mattress height 9 cm.
The anti-bedsore system operates in dynamic and static mode. Dynamic mode is a constant massage. Sections are inflated one at a time and a constant change of inflated and deflated sections gives the feeling of a massage. The static mode stops the massage, all sections are filled and the canvas remains motionless for the required time, after which work in the dynamic mode is restored without removing the patient from bed.
Thanks to the presence of special mounts, the small compressor can be located on the headboard of the bed, under the bed or near it. The low noise level will ensure quality rest for the patient and will not disturb roommates or staff. Quick replacement of the fuse will not leave the patient without the influence of the mattress for a long time and will extend the life of the compressor.
Adjusting the pressure in the mattress fabric will allow you to establish optimal rigidity, maintaining a therapeutic effect, without causing discomfort to the patient. The setting is made according to the patient’s weight using a special regulator on the compressor. The maximum load on the anti-bedsore system can be 135 kg.
The length of the connecting tubes is approximately 1.5 m; this length will make it possible to place the compressor far enough from the bed if necessary. The presence of a valve that retains air in the mattress will reduce the time without massage during a power outage.
The high-quality coating of the canvas does not absorb liquids; for cleaning, you can use a soap solution or gentle cleaning and disinfectants. Due to the fact that all electrical contacts are located far from the fabric, the ingress of liquids onto the mattress fabric poses absolutely no threat to life or health.
ATTENTION! Avoid contact of the mattress fabric with piercing and cutting objects, exclude pets from being on the mattress, this can damage the sections, which will lead to malfunction or impossibility of use. An anti-bedsore mattress should be used on top of a regular mattress or any soft padding.
The universal size of the mattress is designed to be placed on a medical bed or a single household bed.
To start using the anti-decubitus mattress, follow the following instructions:
- remove the product from the box, remove the protective packaging, check the contents and any visible damage;
- lay out the mattress fabric on a flat surface or bed so that the connecting tubes are in the foot section;
- cover the mattress with a sheet;
- place the compressor in a place convenient for use;
- connect the blade and the compressor using tubes, check that the tubes are not crushed or twisted;
- connect the compressor to the network and let the mattress completely fill with air, after which you can select the degree of elasticity according to the person’s weight;
- select the operating mode using the “Static” or “Massage” button.
- The mattress is ready to use!
Using the mattress when there is no electricity :
- if you know in advance when the power will be turned off, you should switch the mattress to static mode;
- After waiting until the canvas is full, you need to disconnect the stopper and close the valve;
- if the power was turned off unexpectedly and you did not have time to prepare, but want to keep the mattress inflated, you need to do the same, switch the compressor to static mode, disconnect the stopper and close the plug;
- in the event of a sudden power outage, the mattress will remain in the state of filling the sections at the time of the shutdown, that is, if some of the sections are filled, the rest will not be filled.
IMPORTANT! In the absence of electricity, but with timely closing of the plug, the mattress holds air for a short time. The mattress will deflate if you do not disconnect the stopper and close the plug.
Using a mattress for bedsores will make the work of medical staff or relatives easier, eliminating the constant turning over of the patient. The anti-bedsore system is a modern and effective method of combating bedsores and skin disorders. A light, smooth massage improves blood flow in soft tissues, normalizes lymph flow and provides oxygen access to the skin. A gentle change of filled sections correctly distributes pressure on the patient’s body and improves overall well-being. The use of an anti-decubitus mattress is possible both at home and in medical institutions for various purposes. The simple compact design is easy to transport and store.
* Information on the website about appearance and characteristics may differ from the actual model. The manager will provide you with more detailed advice when you call or chat .
Why should you choose MED1 brand products ?
Choosing the MED1 brand is a step towards restoring and improving the quality of life, which is taken by thousands of satisfied customers throughout Ukraine and Europe. Each of our products not only meets international quality standards, but also has certificates and declarations of conformity, which guarantees safe and effective use. MED1 not only offers recovery tools, but also reliable support every step of the way to your best health.
At MED1 we understand the importance of availability and support, which is why our service is available to customers 24 hours a day. Warranty service is provided upon customer request to ensure your confidence in our products at any time. Our team of experts is ready to help select the ideal solution for you, as well as provide detailed advice on the initial assembly and launch of products.
Our commitment to high quality and durability, coupled with unmatched customer support, makes MED1 an unrivaled choice in the market. Our commitment to customer satisfaction and innovation makes us your best partner. When you choose MED1, you are getting not just a product, but a comprehensive solution and support along the path to your recovery and well-being.
