The principle of operation of the mattress is that the compressor continuously supplies air to the sheet, alternately inflating the sections, which creates the feeling of a light massage. A hole in the mattress is provided for use in tandem with a functional bed with a sanitary device. For use with medical beds, in which the foot section not only rises, but also falls, a movable part of the mattress is provided, which will make it possible to fully use all positions of the bed.

Mattress MED1-M01-1 can be used for:

• Paralysis;
• The patient is in the intensive care unit or intensive care unit;
• Injuries and fractures, with the recommendation of the attending physician;
• Old age;
• Sedentary lifestyle.

The anti-bedsore system consists of:

• The compressor, which is made of high-quality components, has protection against short circuits and voltage surges;
• A canvas consisting of tube sections. The mattress canvas is protected by a nylon cover, which is easy to clean; the material does not allow liquids to pass through, does not accumulate odors and does not allow bacteria to develop.
• PVC connecting pipes for connecting the compressor to the canvas. PVC is an elastic material that is odorless and very elastic, increases the service life of the product because it does not dry out or crack.

The bedsore mattress has the following dimensions:

• Width 90 cm;
• Length 200 cm;
• Mattress height 9 cm.

The anti-bedsore system operates in dynamic mode. Dynamic mode involves constant massage. Changing the pressure in the sections allows for normal blood and lymph circulation in the skin, constant access of oxygen to the body and distributes pressure on soft tissues.

The compressor is small in size and can be located on the headboard, thanks to the presence of special mounts, under the bed or near it. The low noise level will ensure quality rest for the patient and will not disturb roommates or staff.

Adjusting the pressure in the mattress fabric will allow you to establish optimal rigidity, maintaining the therapeutic effect without causing discomfort to the patient. The setting is made according to the patient’s weight using a special regulator on the compressor. The maximum load on the anti-bedsore system can be 135 kg.

The length of the connecting tubes is approximately 1.5 m; this length will make it possible to place the compressor far enough from the bed, if necessary.

The high-quality coating of the canvas does not absorb liquids; for cleaning, you can use a soap solution or gentle cleaning and disinfectants. Due to the fact that all electrical contacts are located far from the fabric, the ingress of liquids onto the mattress fabric poses absolutely no threat to life or health.

ATTENTION ! Avoid contact of the mattress fabric with piercing and cutting objects, exclude pets from being on the mattress, this can damage the sections, which will lead to malfunction or impossibility of use. An anti-bedsore mattress should be used on top of a regular mattress or any soft padding.

The universal size of the mattress is designed for its location on a medical bed or a single household bed.

A hole for a sanitary device will make it easier to care for the patient; the mattress is designed for use with beds that have a built-in toilet. The hole is closed by a separate segment, which is connected to the common web by a connecting tube; it is inflated all the time and is in static mode. The presence of a hole does not affect the effectiveness of the mattress if it is used on a regular bed or on a medical bed but without a sanitary device.

The presence of a moving part of the mattress will not limit the possibilities of a functional bed. The massage can continue in the “cardio chair” position without the risk of compression of sections of the mattress, which could lead to damage or malfunction.

To start using the anti-decubitus mattress, follow the following instructions:

1. Remove the product from the box, remove the protective packaging, check the contents and any visible damage;
2. Lay out the mattress fabric on a flat surface or bed so that the connecting tubes are in the foot section;
3. Cover the mattress with a sheet;
4. Place the compressor in a place convenient for use;
5. Connect the blade and the compressor using tubes, check that the tubes are not crushed or twisted;
6. Connect the compressor to the network and let the mattress be completely filled with air, after which you can select the degree of elasticity according to the person’s weight;
7. The mattress is ready to use!

An anti-bedsore mattress is an affordable and effective way to avoid or cure bedsores. The product replaces the constant turning over of the patient; smooth movements of the mattress sections replace a light manual massage, which is necessary when a person is immobile or has little activity. This mattress model will not only make it easier to care for seriously ill patients, thanks to the presence of a sanitary hole, but will also make it possible to use the mattress with a large number of beds. The ability to lower your legs while continuing the massage will help you not to interrupt the therapy for a minute. Using a mattress improves your well-being, improves sleep and calms you down. The versatility of the size and the thoughtfulness of all the details and functions make it possible to use it in any medical institution or home, as well as with any bed. Please note that the mattress does not exclude drug treatment, and you should also consult with your doctor before using it.