Mn-Sn: | 8:00 - 21:00 |
Shopping cart | 24/7 |
A high-level multifunctional 3-functional bed is intended for clinics and hospitals, and for home use.
The C03 medical functional bed is an electrically controlled bed designed to facilitate rehabilitation and care for sedentary patients. The bed has four sections, many functions, bed height adjustment, and is also equipped with handrails.
The functional bed can be used both in the hospital and at home.
The bed can be used for:
The patient's stay in intensive care;
Diseases and injuries that limit a person's mobility;
A sedentary and sedentary lifestyle.
The medical bed is made of high-quality materials designed for active use. The frame and bed frame are made of metal coated with powder paint, resistant to disinfection and corrosion. The bed frame made of perforated sheet metal withstands high loads, while providing ventilation and air access to the user from all sides. The footboard and headboard are made of medical plastic, it has no foreign odors, does not cause allergic reactions, and the plastic is also easy to care for and keep clean. The side rails made of aluminum are both light and strong, in order to ensure the safety of the user and prevent falls.
The equipment of the medical functional bed:
Bed size:
The bed frame is divided into 4 sections: main, support and two foot sections. The main section raises the patient to a sitting position, allowing them to eat, work or watch TV, as well as simply change position for convenience. The support section is separate from the others, but is stationary, all moving sections, as well as the control panel, are attached to it. Usually the support section is located approximately in the buttocks area. The foot sections raise the legs under the thigh and lower leg. By raising the head and foot sections, the person finds himself in a "chaise longue" position. The motor allows you to set any convenient angle of inclination.
Thanks to the special design, the bed can change the height of the bed from the floor, which will be convenient for transferring the patient or performing procedures. The height of the bed is adjusted using a remote control.
A remote control system is used to adjust the bed functions. The remote control will help the user or medical staff easily change the position of the bed, as well as the height of the bed from the floor. The bed can be positioned with the back or legs raised separately, as well as simultaneously raise or lower all sections.
The polyurethane foam mattress is divided into sections, completely repeating the curves of the bed. The mattress is thick enough for the user's comfort, and can also be used with an anti-decubitus mattress. The moisture-repellent cover prevents contamination and the accumulation of odors.
The headboard and footboard are made of plastic, easily removable, providing access to the patient in emergency situations from all sides. There is a transparent pocket on the legs for placing patient data, prescriptions or other information.
The side rails are easily folded and raised at the press of a single button. The handrails protect the patient from falling, and in the folded position they are located only at the height of the mattress, without interfering with getting down or sitting on the bed.
The wheels with a high-quality coating roll easily, do not create unnecessary noise, and do not leave marks. The presence of wheels makes the bed more mobile, with their help the bed can be easily moved both around the ward or room, and between rooms, without removing the patient.
The bed comes practically assembled, using simple instructions, you can prepare it for use:
The functional medical bed С03 will be an excellent alternative to a simple bed, it will help to provide comfort to the patient, and also facilitate the work of medical personnel or relatives. Due to the presence of many functions and positions, the bed can be used for various diagnoses and conditions. High-quality materials and a well-thought-out design will ensure long-term and reliable operation. The functional bed for bedridden patients can be used both in a hospital or sanatorium, and at home. Using the control panel will give the user freedom of action, a conscious person will be able to independently change the position of the body when he needs it.
Do you have any questions? Write to the chat or order a call through our website - our managers will contact you as soon as possible
* Information on the website about the appearance and characteristics may differ from the actual model. A manager will provide you with more detailed advice when calling or chatting.
Why should you choose MED1 brand products?
Choosing the MED1 brand is a step towards restoring and improving the quality of life, which is taken by thousands of satisfied customers throughout Ukraine and Europe. Each of our products not only meets international quality standards, but also has certificates and declarations of conformity, which guarantees safe and effective use. MED1 offers not only means for restoration, but also reliable support at every stage of your journey to better well-being.
At MED1, we understand the importance of accessibility and support, which is why our service is in touch with customers 24 hours a day. Warranty service is carried out at the first request of the client to ensure your confidence in our products at any time. Our team of experts is ready to help you choose the ideal solution for you, as well as provide detailed advice on the initial assembly and launch of products.
Our commitment to high quality and durability, coupled with unparalleled customer support, makes MED1 the unrivaled choice in the market. Our commitment to customer satisfaction and innovation makes us your best partner. When you choose MED1, you get more than just a product, but a comprehensive solution and support on your path to recovery and well-being.
Appointment of a medical bed : | Для дома и больницы |
Availability of a toilet : | Нет |
Availability of wheels : | Есть |
bed height from the floor : | 50 - 72.5 см |
Bed dimensions, LxW, cm : | 213 х 98 |
Bed size, LxW, cm : | 194 х 88 |
Brand : | MED1 |
Foot section lift angle : | 30 |
Guarantee period : | 12 месяцев |
Head section angle : | 75 |
Height adjustment : | Есть |
Human flip function : | Нет |
Maximum load : | 260 кг |
Number of sections : | 4 |
Product Popularity : | Часто покупают |
Section drive : | Электрический |
The presence of handrails : | Есть |
Trendelenburg position : | Нет |
A high-level multifunctional 3-functional bed is intended for clinics and hospitals, and for home use.
The C03 medical functional bed is an electrically controlled bed designed to facilitate rehabilitation and care for sedentary patients. The bed has four sections, many functions, bed height adjustment, and is also equipped with handrails.
The functional bed can be used both in the hospital and at home.
The bed can be used for:
The patient's stay in intensive care;
Diseases and injuries that limit a person's mobility;
A sedentary and sedentary lifestyle.
The medical bed is made of high-quality materials designed for active use. The frame and bed frame are made of metal coated with powder paint, resistant to disinfection and corrosion. The bed frame made of perforated sheet metal withstands high loads, while providing ventilation and air access to the user from all sides. The footboard and headboard are made of medical plastic, it has no foreign odors, does not cause allergic reactions, and the plastic is also easy to care for and keep clean. The side rails made of aluminum are both light and strong, in order to ensure the safety of the user and prevent falls.
The equipment of the medical functional bed:
Bed size:
The bed frame is divided into 4 sections: main, support and two foot sections. The main section raises the patient to a sitting position, allowing them to eat, work or watch TV, as well as simply change position for convenience. The support section is separate from the others, but is stationary, all moving sections, as well as the control panel, are attached to it. Usually the support section is located approximately in the buttocks area. The foot sections raise the legs under the thigh and lower leg. By raising the head and foot sections, the person finds himself in a "chaise longue" position. The motor allows you to set any convenient angle of inclination.
Thanks to the special design, the bed can change the height of the bed from the floor, which will be convenient for transferring the patient or performing procedures. The height of the bed is adjusted using a remote control.
A remote control system is used to adjust the bed functions. The remote control will help the user or medical staff easily change the position of the bed, as well as the height of the bed from the floor. The bed can be positioned with the back or legs raised separately, as well as simultaneously raise or lower all sections.
The polyurethane foam mattress is divided into sections, completely repeating the curves of the bed. The mattress is thick enough for the user's comfort, and can also be used with an anti-decubitus mattress. The moisture-repellent cover prevents contamination and the accumulation of odors.
The headboard and footboard are made of plastic, easily removable, providing access to the patient in emergency situations from all sides. There is a transparent pocket on the legs for placing patient data, prescriptions or other information.
The side rails are easily folded and raised at the press of a single button. The handrails protect the patient from falling, and in the folded position they are located only at the height of the mattress, without interfering with getting down or sitting on the bed.
The wheels with a high-quality coating roll easily, do not create unnecessary noise, and do not leave marks. The presence of wheels makes the bed more mobile, with their help the bed can be easily moved both around the ward or room, and between rooms, without removing the patient.
The bed comes practically assembled, using simple instructions, you can prepare it for use:
The functional medical bed С03 will be an excellent alternative to a simple bed, it will help to provide comfort to the patient, and also facilitate the work of medical personnel or relatives. Due to the presence of many functions and positions, the bed can be used for various diagnoses and conditions. High-quality materials and a well-thought-out design will ensure long-term and reliable operation. The functional bed for bedridden patients can be used both in a hospital or sanatorium, and at home. Using the control panel will give the user freedom of action, a conscious person will be able to independently change the position of the body when he needs it.
Do you have any questions? Write to the chat or order a call through our website - our managers will contact you as soon as possible
* Information on the website about the appearance and characteristics may differ from the actual model. A manager will provide you with more detailed advice when calling or chatting.
Why should you choose MED1 brand products?
Choosing the MED1 brand is a step towards restoring and improving the quality of life, which is taken by thousands of satisfied customers throughout Ukraine and Europe. Each of our products not only meets international quality standards, but also has certificates and declarations of conformity, which guarantees safe and effective use. MED1 offers not only means for restoration, but also reliable support at every stage of your journey to better well-being.
At MED1, we understand the importance of accessibility and support, which is why our service is in touch with customers 24 hours a day. Warranty service is carried out at the first request of the client to ensure your confidence in our products at any time. Our team of experts is ready to help you choose the ideal solution for you, as well as provide detailed advice on the initial assembly and launch of products.
Our commitment to high quality and durability, coupled with unparalleled customer support, makes MED1 the unrivaled choice in the market. Our commitment to customer satisfaction and innovation makes us your best partner. When you choose MED1, you get more than just a product, but a comprehensive solution and support on your path to recovery and well-being.
Appointment of a medical bed : | Для дома и больницы |
Availability of a toilet : | Нет |
Availability of wheels : | Есть |
bed height from the floor : | 50 - 72.5 см |
Bed dimensions, LxW, cm : | 213 х 98 |
Bed size, LxW, cm : | 194 х 88 |
Brand : | MED1 |
Foot section lift angle : | 30 |
Guarantee period : | 12 месяцев |
Head section angle : | 75 |
Height adjustment : | Есть |
Human flip function : | Нет |
Maximum load : | 260 кг |
Number of sections : | 4 |
Product Popularity : | Часто покупают |
Section drive : | Электрический |
The presence of handrails : | Есть |
Trendelenburg position : | Нет |
![]() |
Video reviews of any model |
![]() |
Working with Prozorro |
![]() |
Found cheaper? We will make the price even lower! |
![]() |
Free delivery to the branch |
![]() |
Sending without prepayment |
![]() |
Help with assembly |
![]() |
Discounts on anti-decubitus mattresses |
![]() |
Loan up to 24 months |
![]() |
SEE BELOW PROMOTIONAL OFFERS |
![]() |
Video reviews of any model |
![]() |
Working with Prozorro |
![]() |
Found cheaper? We will make the price even lower! |
![]() |
Free delivery to the branch |
![]() |
Sending without prepayment |
![]() |
Help with assembly |
![]() |
Discounts on anti-decubitus mattresses |
![]() |
Loan up to 24 months |
![]() |
SEE BELOW PROMOTIONAL OFFERS |